Surfaces CareRequest a Consultation
Back to Products
Greenest Metal Cleaner & Protector
GREENEST · Metal Care

Greenest Metal Cleaner & Protector

منظف وحماية المعادن جرينيست

SKU: GNMT16-1

A professional ready-to-use solvent-based cleaner and protector for metal surfaces. Removes fingerprints and everyday soiling while leaving a protective film that helps reduce dust adhesion and fingerprints, maintaining a clean, natural shine and professional appearance for longer.

Cleans and protects in one step
Reduces fingerprints (Anti-Fingerprint)
Fast drying
Leaves no streaks or marks
Ready to use
Elevators and metal doors
Handrails, claddings and interior facades
Metal appliances and equipment
Commercial buildings and public facilities
Hospitality and offices

Physical & Chemical Properties

Appearance
Transparent liquid
Surface compatibility
• Stainless Steel • Chrome • Aluminium • Copper • Brass • Nickel • Polished Metal Surfaces • Elevators, doors, handrails, claddings and interior facades
Not suitable for
• Marble • Natural stone • Painted or coated surfaces unless compatibility has been verified • Untreated wood • Food-contact surfaces • Any surface near an ignition source
Odor
Characteristic solvent odour.
Density
0.91–0.94 at 23°C
Solubility
Insoluble
Flash point
13°C (55°F), Closed Cup
Boiling point
Data not available
Melting point
Not determined
Vapor pressure
Data not available
Evaporation rate
Data not available
VOC
Data not available
Shelf life
24 months
Storage temperature
5 – 35 °C

Dilution & Usage

Usage steps
1. Apply the product onto a microfiber cloth or directly onto the surface. 2. Spread evenly over the surface. 3. Wipe with regular strokes until dry. 4. Buff with a clean, dry microfiber cloth for best shine and protection. 5. Use on cold, clean surfaces only.

Packaging & Logistics

Pack size
1 L
Net content
1 L (1000 mL)
Pack type
Bottle
Barcode
TBD
Country of origin
KSA

Safety Data (GHS/SDS)

Composition
• n-Pentane (65%, CAS 109-66-0, EC 203-692-4) — Flam. Liq. 2 (H225); Asp. Tox. 1 (H304); STOT SE 3 (H336); Aquatic Chronic 2 (H411); EUH066 • Polyethylene wax (15%, CAS 9002-88-4, polymer — no EC No.) — Not classified • Carnauba Wax (10%, CAS 8015-86-9, EC 232-399-4) — Not classified • Silicon Dioxide (10%, CAS 7631-86-9, EC 231-545-4) — Not classified
Signal word
DANGER
GHS pictograms
GHS02, GHS08, GHS09
Hazard statements
Classification: Flammable Liquid – Category 2; Aspiration Hazard – Category 1; Specific Target Organ Toxicity (Single Exposure) – Category 3; Hazardous to the Aquatic Environment (Chronic) – Category 2. | H225, H304, H336, H411, EUH066
Precautionary statements
P210, P233, P240, P241, P242, P243, P261, P264, P271, P273, P280, P301+P310, P331, P303+P361+P353, P370+P378, P403+P235, P501
Personal protective equipment
Chemical-resistant nitrile gloves. Safety goggles or face shield where splashing is possible.
First aid — eyes
Rinse cautiously with water for at least 15 minutes, holding eyelids open. Remove contact lenses if present. Get medical advice if irritation persists.
First aid — skin
Take off contaminated clothing. Wash skin with plenty of water and soap. Get medical advice if a rash or irritation develops.
First aid — inhalation
Remove person to fresh air and keep comfortable for breathing. Get medical advice if symptoms persist.
First aid — ingestion
Rinse mouth with water. Do NOT induce vomiting (aspiration hazard — may be fatal if it enters the airways). Immediately seek medical attention.
Firefighting measures
Flammable liquid and vapour; vapours may travel to an ignition source and flash back. Suitable extinguishing media: alcohol-resistant foam, dry chemical powder, carbon dioxide (CO2) or water fog. Do not use a heavy/direct water jet. Requires SCBA and full protective clothing.
Accidental spill
Eliminate ignition sources, ensure adequate ventilation, wear gloves and eye protection. Contain and absorb the spill with inert material (sand, vermiculite) and collect into a closed container for disposal. Do not use sparking tools. Prevent entry into drains, waterways and soil.
Stability
Stable under normal storage and handling conditions. Avoid heat, sparks, open flame, direct sunlight and static discharge. Incompatible with strong oxidizing agents. Combustion produces carbon oxides. Handling: use only in well-ventilated areas away from heat, sparks and open flame. No smoking. Avoid breathing spray and skin/eye contact. Use non-sparking, grounded equipment.
Toxicology
No experimental toxicological data available for this product. Repeated exposure may cause skin dryness or cracking (EUH066). May cause temporary eye discomfort. Aspiration hazard if swallowed (H304). May cause drowsiness or dizziness (H336).
Ecology
Toxic to aquatic life with long lasting effects (H411, from n-pentane). No biodegradability data available for the mixture. Product is insoluble in water — prevent release into drains, soil and watercourses.
Disposal
Dispose of product and residues via an authorized facility in accordance with local environmental regulations. Do not empty into drains. Do not reuse the empty container.
UN number
UN1993
Transport class
Class 3 – Flammable Liquid, Packing Group II. Proper shipping name: FLAMMABLE LIQUID, N.O.S. (contains n-Pentane)
Regulatory
Subject to GSO/SASO chemical classification and labelling requirements (GHS).
Warnings
Highly flammable liquid. Keep away from heat, sparks and open flames. Professional use only.

Documents

TDSAREN
PISAREN
SDSAREN